Flexsteel® 250 Steam

Flexsteel<sup>®</sup> 250 Steam

APPLICATION:

Used for cleaning, heat control, fire prevention, pumping, thawing, blow-out service, steam pumps, and hoists in open-end or permanent installation operations. It is used in refineries, shipyards, chemical plants, steel mills, foundries, and heavy industrial applications where high strength is required and where severe environmental conditions are encountered.

CONSTRUCTION:

TUBE: Pyrosyn® synthetic rubber

COVER: Black or Red Pyrosyn, smooth finish, pin-pricked

REINFORCEMENT: Braided steel wire (3/4" and 1" have 2 steel wire braids)

TEMPERATURE: 0°F to 450F (-18°C to 232°C)

PACKAGING: Reels or 50' cut lengths (1/2"–4 per box, 3/4"–3 per box, 1"–2 per box)

BRANDING: Continuous brand example “Goodyear™ Flexsteel 250 Steam (DC) Drain after using. Made in USA.”

COUPLINGS: Contact fitting manufacturer for proper fitting recommendation and coupling procedure.

NON-STOCK/SIZES: Refer to page 300 for special production run minimum requirements.

ORDER CODES: 539-070 (black) / 539-076 (red)

ID NOM. OD MAX. WP WEIGHT
in. mm. in. mm. psi. Mpa. lb./ft. kg./m.
1/2* 12.7 1.06 26.9 250 1.72 0.40 0.60
3/4 19.1 1.28 32.5 250 1.72 0.49 0.73
1* 25.4 1.63 41.4 250 1.72 0.84 1.25